Important notes

The patch update files are different for different builds. Please be sure you download the correct patch update file for your installation.

This patch update is for the English version only. Do not use this patch if you have the German version of one of our products.

If you're running Version 4.0 under a floating license, your system administrator must update the version of FlexLM installed on your server before you can use any Version 4.1 build. FlexLM Version 8.1 comes with our Version 4.1 CD, but is not available by download. For information about installing a new version of FlexLM and obtaining an updated serial number, system administrators should either contact the distributor from whom the product was purchased or contact MacKichan Software technical support by email or by telephone at (206) 780-2799 or (877) 724-9673.

Instructions
Check the version of SWP/SW/SNB you're using.

1. Start your copy of the program.

2. From the Help menu, choose About and note the version and build numbers.

If you currently have build 2312 or 2321 of Version 4.0 or build 2345 of Version 4.1, you can use the patch update.

If you have Version 3.5x or earlier, you must purchase an upgrade to Version 4.

Choose the appropriate file from the table following these instructions and download it to your local hard drive.

When the download is complete, close your current version of SWP, SW, or SNB.

Run the downloaded program and follow the screen prompts.

Start the program.

From the Help menu, choose About, and check that the build number is 2347.

If you have	Download patch update
Scientific WorkPlace
v4.1 build 2345	swp41b2345to2347.exe (293 KB)
v4.0 build 2312 or 2321	swp40to41b2347.exe (3.21 MB)
Scientific Word
v4.1 build 2345	sw41b2345to2347.exe (292 KB)
v4.0 build 2312 or 2321	sw40to41b2347.exe (3.15 MB)
Scientific Notebook
v4.1 build 2345	sn41b2345to2347.exe (278 KB)
v4.0 build 2312 or 2321	sn40to41b2347.exe (2.38 MB)